I thank you for your interest in tutoring ENGG1010.
Please read the following. If there is anything that is not clear, please ask me.
The timetable for the course delivery is on http://www.mech.uq.edu.au/courses/engg1010/ENGG1010_TutorTimetable_Sem1_2009. There are tutors assigned to each delivery item (except for the lectures). Please check where and when you are assigned. Note that the table headings for X0, X1, ..., X9. These are assigned to names at the end of the document.
Tutorial Hours
==========
The students will be asked their questions to these tutorials and the tutors
should be able to answer them. The questions are most likely to be related to
the on-line tutorial (http://www.mech.uq.edu.au/courses/engg1010/yat_door.php
).
Blackboard
========
Brian, I would like you to monitor the Blackboard discussions and answer questions
as soon as they arise. All other tutors are also added to the Blackboard site
for tutors and they are also encouraged to monitor discussions and to provide
answers when they can.
Laboratory Practicals
===============
Arash Ejlali is the Senior Tutor for laboratory practicals. There are two Dynamics
pracs.
Those of you running laboratory pracs for the first time, make sure that you learn from Arash to understand exactly what you are supposed to do. The best way is to attend the first prac, which will be done by Arash and Matthew. If you have questions, please ask Arash.
Contact Hours
===========
These will be run by Professor Russel Boyce and Michael Creagh. You will solve example problems in these sessions.
Timesheets
========
The timetables are to be filled in as
* 3 hours for each laboratory prac session (two hours the actual prac + 1 hour
for before and clean-up afterwards)
* The Senior Laboratory Tutor (Arash Ejlali) is expected to spend about 30 minutes
on each prac making sure the assigned tutors start and finish the tutorial on
time and the atendance list is entered into Blackboard..
* 2 hours for each tutorial session (1 hour for preparation + 1 hour for the
contact)